Locate Heater Model Number

Locate your heater model number, bulb heater model, ValueTest heater model, Deluxe heater model, wall heater model, Kickspace heater model for Broan, NuTone and Panasonic heaters.

Bulb Heater:	Model Label Placement Remove the bulb(s) from the unit. Remove the springs from the hooks inside the rough-in box. The model number is located on the inside end of the rough-in box.
ValueTest Heater:	Model Label Placement Release the locking tabs on the lens. Remove the lens. Remove the reflector mounting screw. Remove the reflector and grille. The model number is located on the inside edge of the housing.
Deluxe Heater:	Model Label Placement Look through grille for screws and key-hole spots. Loosen screws. Twist complete grille approximately 2 inches. Grille assembly will be free to drop down from ceiling. The model number is located on the inside of the can.
Kickspace Heater:	Model Label Placement Remove 4 screws from the top corners (2 in front & 2 in back). Remove top cover. The model number is located on the data label inside the unit. It can be found in the front right corner.
Wall Heater:	Model Label Placement Remove the (2) screws from top and bottom of the grille; on some units you will also need to remove the thermostat knob. Carefully remove complete power unit from rough-in box. The model label is located on the back middle of the rough-in box.